Demo Page
Best-in-class Printing Performance
Sample Parts
Rocket Thrust Chamber
Deposition Rate: 4 lbs. per hour
Total Built Time: 20 hours
Material: Duplex Stainless Steel
Dimensions: 1 meter tall and 1 meter wide
System Used: ADDere Custom System
The final machined thrust chamber body has a sidewall thickness of 3mm with thicker walls in the combustion chamber.
Engine Exhaust Cover
Deposition Rate: 4 lbs. per hour
Total Built Time: 40 hours
Material: Duplex Stainless Steel
Dimensions: 1 meter diameter
System Used: ADDere Custom System
A single complex shape made from stainless steel. This part was built as a single solid component.
Turbine Blade
Deposition Rate: 4.5 lbs. per hour
Total Built Time: 30 hours
Material: Duplex Stainless Steel
Dimensions: 1.8 meters tall
System Used: ADDere Custom System
The completed turbine blade has a hollow interior and a 5mm wide sidewall. It is 1800 layers tall with a height variant of 0.5mm.
Propeller
Deposition Rate: 3 lbs. per hour
Total Built Time: 4 hours
Material: Carbon Steel
Dimensions: Each blade is 25 cm long
System Used: ADDere Standard System
Thin-walled metal components are 3D printed directly onto an existing steel part in this case a piece of steel round bar.
Freeform Design
Deposition Rate: 4.5 lbs. per hour
Total Built Time: 20 hours
Material: Stainless Steel
Dimensions: Wingspan is 1.6 meters long
System Used: ADDere Custom System
A large demonstration part with a hollow 6mm wall thickness.
Wing Spar Cross-section
Deposition Rate: 6 lbs. per hour
Total Built Time: 1 hour
Material: Titanium Ti64
Dimensions: 50 cm long
System Used: ADDere Custom System
High-complexity 3D print in titanium. Cross-section aspects of 3D printing reduce construction times and make for a stronger overall part.
Large Gear
Deposition Rate: 20 lbs. per hour
Total Built Time: 10 hours
Material: Stainless Steel
Dimensions: 1 meter diameter
System Used: ADDere Custom System
A custom-designed solid gear or sprocket made entirely from stainless steel.
Mold Die Form
Deposition Rate: 6 lbs. per hour
Total Built Time: 3 hours
Material: Carbon Steel
Dimensions: 25 cm diameter
System Used: ADDere Standard System
Rapidly produce custom plastic injection molding die forms with additive manufacturing.
